性能特点

机身刚性(变形量)1/6000。

采用气动湿式离合刹车器，环保、无污染、低噪音、使用寿命长。

滑块采用两角六面导路，滑块导轨采用“高频淬火”十 “导轨研磨工艺”，磨损小、精度高、精度保持时间长、提高模具使用寿命。

曲轴采用高强度合金材质42CrMo，强度比45钢提高了1.3倍，使用寿命更长。

铜套采用锡磷青铜ZQSn10-1，强度比普通BC6黄铜提高了1.5倍。

采用高灵敏液压过载保护装置，可有效保护冲床和模具使用寿命。

标配日本SMC调压阀、油雾器、空气过滤器。

标配日本NSK轴承、日本NOK密封件。

标配德国西门子PLC、西门子触摸屏、西门子电机、

可选配模垫(气垫)。

The rigidity of the fuselage (deformation) is 1/6000.

Pneumatic wet clutch brakes are environmentally friendly, non-polluting, low noise and long service life.

The slider adopts two-corner and six-sided guides, and the slider guide adopts “high-frequency quenching” ten “rail grinding process”, small wear, high precision, long precision maintenance time and improved die life.

The crankshaft is made of high-strength alloy 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.

The copper sleeve is made of tin phosphor bronze ZQSn10-1, which is 1.5 times stronger than ordinary BC6 brass.

The highly sensitive hydraulic overload protection device protects the life of the press and die.

Standard Japanese SMC pressure regulator, oil mister, air filter.

Standard NSK bearings from Japan and NOK seals from Japan.

Standard German Siemens PLC, Siemens touch screen, Siemens motor,

Optional mat (air cushion).