性能特点

机身刚性(变形量)1/6000。

采用OMPI气动干式离合刹车器。

滑块采用两角六面导路，滑块导轨采用“高频淬火”十 “导轨研磨工艺”，磨损小，精度高，精度保持时间长、提高模具使用寿命。

曲轴采用高强度合金材质42CrMo，强度比45钢提高了1.3倍，使用寿命更长。

铜套采用锡磷青铜ZQSn10-1，强度比普通BC6黄铜提高了1.5倍。

采用高灵敏液压过载保护装置，可有效保护冲床和模具使用寿命。

标配SMC调压阀、油雾器、空气过滤器。

可选配模垫(气垫)。

The rigidity of the fuselage (deformation) is 1/6000.

OMPI pneumatic dry clutch brakes are used.

The slider adopts two-corner and six-sided guides, and the slider guide adopts “high-frequency quenching” ten “rail grinding process”, which has small wear, high precision, long precision and long service life.

The crankshaft is made of high-strength alloy 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.

The copper sleeve is made of tin phosphor bronze ZQSn10-1, which is 1.5 times stronger than ordinary BC6 brass.

The highly sensitive hydraulic overload protection device protects the life of the press and die.

Standard SMC pressure regulator, oil mister, air filter.

Optional mat (air cushion).