铝型材单棒加热炉-启程达铝材设备

加热炉将铝棒从环境温度加热到挤压温度（温度为480-500ºC），从而保证挤压过程在完整生产条件下顺利进行。

The furnace heats the billet of ambient temperature to the extrusion temperature (indicative 480-500 º C), guaranteeing the operation of the press in full production regime.

加热炉是主要通过直接加热，其分为不同的加热区，每个区域都配备有点和，所有动作都由PLC控制。 还有一个间接加热区，通过热风再循环将热气带到加热炉后部来节省能源。 通过此系统，增加了加热炉的盈利能力。

The furnaces are direct heating, divided into different zones, each of which is equipped with its own pilot flame and probe to control the temperature, all managed by a PLC. There is an indirect heating zone that provides energy savings by recirculating the hot combustion gases and injecting them at high speed to the rear of the furnace. With this system increases the profitability of the furnace.

该炉可配备梯度加热系统使铝棒获得梯型温度，实现在恒定温度下挤压（等温挤压）。

The furnace can be equipped with a tappering system used to obtain a gradient in the log temperature and be able to extrude at a constant temperature (isothermal extrusion).

产品特点Features

余热利用系统，可使余热再循环利用

Exhaust preheating system that captures and recirculates exhaust gases

的温度控制系统
State-of-the-art temperature control systems

炉膛压力控制器
Furnace chamber pressure controller

设计合理，易于维护
The reasonable design ensures the simplicity of its maintenance.

容易更换铝棒
Easy to change the billet

高效节能
Energy efficient

易于操作-温度控制系统
Ease of operation - temperature control system

更高的温度均匀性和效率
Greater temperature uniformity and efficiency

技术参数Technical parameters

电压Voltage：380V(根据客户要求Customized)

频率Frequency：50Hz/60Hz(根据客户要求Customized)

铝棒直径Billet diameter：Φ89~Φ510mm

温度Temperature：450℃~550℃

芯表温差Core temperature difference：±5℃

头尾温差End temperature difference：±5℃

燃料Fuel ： NG/LPG/LNG