品牌
其他厂商性质
佛山市所在地
| 热锯Hot saw |
| 主要用于切断铝棒直径较大，或者对剪切铝棒加工要求较高的场合，代替热剪机。 |
| It is mainly used to cut off the larger diameter of billet, or to replace the hot shears in the occasions where the processing requirements of shearing billet are high. |
| 在锯切过程中对铝棒的变形量比热剪小，几乎没有变形；如果配合剥皮机可以较好地剥掉外面的氧化层。 |
| The deformation of the aluminum rod during the sawing process is smaller than that of the hot shearing machine, and there is almost no deformation; if the peeling machine is combined, the outer oxide layer can be peeled off well. |
| 锯切的长度准确性比热剪机高，可达±1MM。还可以带短棒接棒功能，提高产品的成品率。 |
| The length of the saw is more accurate than the hot shear, up to ±1MM. Can be equipped with a short log to improve the yield of the product. |
|
| 产品特点Features |
| 较小的锯片可减少切口缝隙 Smaller blade results in less kerf |
| 锯片更轻，更容易更换 Blade change easier due to lighter blades |
| 铝棒的锯切端是平整的的和规则的 Sawed ends on billets are flat and square |
| 高效节能的铝屑回收和油雾回收系统 Efficient and energy-saving aluminum chips recovery and oil mist recovery system |
| 减少挤压排气时间，提高产量 Reduce extrusion time and increase production |
| 减少气泡的产生 Reduce bubble generation |
|
| 技术参数Technical parameters |
| 铝棒直径Billet diameter：Φ89~Φ550mm |
| 铝棒长度Billet length：5m~8m |
| 锯切精度Saw cut accuracy: ± 1mm |
| 锯切速度Max sawing speed 30mm/s |
| 采用喷雾润滑Using spray lubrication |
