MECATOME T255/300

• Manual cutting machine (optional automatic module).

• Two different speeds : 3200 or 3800 Rpm.

• Cutt-off wheels Ø 250 or 300 mm.

• Ideal Machine for metallographic laboratories which cut samples of all kinds.

• Vices in horizontal or vertical position allow the tightening of samples of complex forms.

Specifications

• Bench mounted cut-off machine.

• Robustly built in sheet steel.

• The hood opens compleyto provide

 easy access and includes  safety switch.

• Two quick clamping vices,2 positions: Horizontal or Vertical.

• Cutting wheel diameter 250or 300 mm.

• 2 rotational speed of the cutting  wheel: 3200 and 3800 rpm.

• Motor 3 HP - voltages available 230V single-phase.

• Lighting.

• 2 adjustable jets mounted on each side of the wheel.

• PVC pump and tank.

• Built in accordance with EEC standards.

AUTOMATIC MODULE

• Continuously adjustable variable feed speed from 0 to 160 mm/mn.

• Cut by impulses.

• Quick advance and return.

• Automatic module can be disengaged for manual cutting.

• Automatic return after end of cutting, with cut-off wheel rotation stop.

Operating

MECATOME T255/300is a sensitive manual cut-off

machine.

• Motor and cutting wheel(250 or 300 mm diameter) are mounted on a free running bearing which allows, thanks

to the arm movement, a clean and precise cut.

• The quick clamping vices operate in both horizontal and

vertical positions.

• Due to its automatic module, the MECAPOL T255/300 offers  automatic cutting functions, with adjustable variable feed speed, return and stop after end of cutting, allowing the operator to return to the machine after the cut is complete. The automatic functions can be disengaged allowing a manual cutting operation when required for special

applications.