斩拌机是利用高速旋转的斩刀将肉、蔬菜、香菇、木耳、葱、姜等物料斩切成不同大小的颗粒。我公司生产的斩拌机刀速、锅速、斩刀与转锅的间隙达到Z合理的组合,使斩切产品颗粒更均匀。转锅后盖带防漏胶条,斩料和清洗过程中不向锅外漏料。刀轴采用两道密封,保护轴承不被锈蚀,延长轴承的使用寿命,防止油污进入锅内,保持刀轴旋转部位良好的润滑使传动平稳,密封件易于更换。刀尖与斩锅的间隙小于2mm。

The cutting machine utilized the cutter rotating with high speed to cut the meat,vegetable, fragrant mushroom, agarics, shallot and ginger etc into the grains with different sizes.The cutting machine produced by our company has the most suitable combination of the cutting speed, pot speed and the distance between the cutter and rotating pot, all these make the cut grains more equal.The back cover of the rotating pot has the rubber bar to prevent the leak, so the material won't leak out during the period of cutting and washing. The axis of cutter has two seals to protect the axletree from being eroded, which can extend the life of the axletree and prevent the drain dropping into the pot and keep the nice lubrication of the rotation place and keep the transmission stable. The seal parts are easy to replace.The distance of the cutter's point and the cutting pot is less than 2mm.

斩拌机刀速、锅速、斩刀与转锅的间隙达到Z佳的组合，使斩切产品细度好、升温小、斩拌时间短，特别是由于乳化处理，使肠类产品的细密度与弹性大大增强，的提高了肉制品乳化效果、弹性及细腻度。斩拌机

特点

斩拌机利用斩刀高速旋转的斩切作用，将肉及辅料斩成肉馅或肉泥，还可以将辅料、、水与肉馅或肉块一起搅拌均匀。

采用变频技术，刀速调整范围大，具有高效节能的功能，刀速、锅速、斩刀与斩锅的间隙、斩刀材质和刀的硬度设计Z为合理。

配置

整机采用SUS304不锈钢板制作，结构合理、美观，易清洗。

1、本机以不锈钢为原料制作，结构紧凑、美观，易清洗。

2、主要部件采用加工中心加工、确保加工精确度。

3、刀刃锋利耐用、高速运行平稳，料转拌、乳化效果好。

4、选用进口轴承；电机符合欧标，抗过载能力强。

5、转速达到4500转，能大大提高乳化效果，使产品出品率更高，效果更好。

6、刀尖与斩锅的间隙小于2mm.斩拌机