一、性能参数

风量范围：2655～83650m3/h

风压范围：520～2360 Pa

传动方向：皮带式（C）

方向角度：可制成顺时针或逆时针，均可制成0°，45°，90°，135°，180°，225°，270°，315°八种角度。

二、用途

此风机分为后倾式及S型风叶，叶片宽大，流线型对于涂装设备烤漆炉，工业烤箱，工业烤炉，热风循环场所显著

定载风压特性，中压型，风叶设计不易造成堵塞，噪音低，广泛用于涂装设备行业，高温炉行业，陶瓷窑炉行业等输送热气

特别说明：

保温层：常规100mm；根据客户使用温度及型号调整（50mm-300mm）厚度；采用硅酸铝棉保温

进风口可制作成：方形及圆形

轴承座：连体式，分体式

Performance parameters

Air volume range: 2655 ～ 83650m3/h

Wind pressure range: 520-2360 Pa

Driving direction: belt type (C)

Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.

Purpose

This fan is divided into backward inclined and S-shaped blades, which are wide and streamlined. It is significant for paint baking ovens, industrial ovens, industrial ovens and hot air circulation places of painting equipment

Constant load wind pressure characteristics, medium pressure type, fan blade design is not easy to cause blockage, low noise, widely used in coating equipment industry, high-temperature furnace industry, ceramic kiln industry, etc. to transport hot gas

Special instructions:

1.Thermal insulation layer: 100mm in general; Adjust the thickness (50mm-300mm) according to the customer's operating temperature and model; Aluminum silicate wool insulation

2.The air inlet can be made into square and round

3.Bearing pedestal: integral type, split type