产品型号：JSN1801

产品名称：发动机冷却液铝泵气穴腐蚀测定器 (JSN1801)

产品说明：

JSN1801发动机冷却液铝泵气穴腐蚀测定器
一、符合SH/T0087、ASTMD2809标准
二、主要技术参数：
铝泵转速： 2675r/min、4600±100r/min
压力指示： 103±3Kpa
控制温度： 63~68℃、113±3℃
加热功率： 2kw 
整机功率： 4.2kw
工作电源： AC380V±10%  50HZ
外形尺寸： 1100×660×1400=长×宽×高（mm）
整机重量： 180Kg
三、性能及特点
1、采用铝泵和发动机前盖,铝泵拆卸更换方便。
2、采用防爆电机，两种泵速用变频器调速，数显表显示实测速度，准确直观，电路控制装有超温保护。
3、系统采用不锈钢管连接，台面用不锈钢制作，紧固件采用不锈钢螺丝，易拆卸不易生锈。
4、采用多功能数显计时器、中途停机后能延续计时。
5、采用电热管加热, 贮液罐上装有安全阀，能确保仪器运行的安全可靠。
6、仪器采用进口数显温度控制器，PID跟踪控温精度高。

JSN1801 engine coolant aluminum pump cavitation corrosion tester

A, in line with SH/T0087, ASTMD2809 standards

Ii. Main Technical parameters:

Aluminum pump speed: 2675r/min, 4600±100r/min

Pressure indication: 103±3Kpa

Control temperature: 63~68℃, 113±3℃

Heating power: 2KW

Machine power: 4.2KW

Power supply: AC380V±10% 50HZ

Dimensions: 1100×660×1400= Length × width × height (mm)

Machine weight: 180Kg

Iii. Performance and Characteristics

1. Aluminum pump and engine front cover are adopted for easy removal and replacement of aluminum pump.

2, the use of explosion-proof motor, two kinds of pump speed with frequency converter speed, digital display table shows the measured speed, accurate and intuitive, circuit control with overtemperature protection.

3, the system is connected with stainless steel pipe, the table is made of stainless steel, the fastener is made of stainless steel screws, easy to remove and not easy to rust.

4. Multi-function digital display timer is adopted, which can continue the timing after stopping midway.

5. Electric heat pipe is used for heating, and safety valve is installed on the liquid storage tank, which can ensure the safe and reliable operation of the instrument.

6, the instrument adopts imported digital display temperature controller, PID tracking temperature control precision is high.