产品型号：JSH2102

产品名称：车辆齿轮油成沟点测定器(JSH2102)

产品说明：

JSH2102车辆齿轮油成沟点测定器

一、符合SH/T0030标准

二、主要技术参数：

控温范围：常温～－60℃可调 

控温精度：±0.5℃

控温方式：进口数显温控仪控温

致冷方式：复叠式压缩机致冷

计时方式：数显计时0-99小时自动计时

工作电源：AC220V±10％  50Hz

三、性能及特点：

1、采用复叠式压缩机致冷，具有降温速度快，使用寿命长，不需循环冷却水等特点。

2、采用进口压缩机，噪音低，振动小。

3、采用进口数显温控器控温，控温精度高，显示直观。

4、采用数显计时器计时，计时方便，到达设定时间后会自动报警，提醒操作者结束试验。

JSH2102 gear oil trenching point tester for vehicles

I. It conforms to SH/T0030 standard

Ii. Main Technical parameters:

Temperature control range: normal temperature ~ -60℃ adjustable

Temperature control accuracy: ±0.5℃

Temperature control mode: imported digital display temperature controller

Refrigerating mode: refrigerating with multiple compressor

Timing: Digital display timing 0-99 hours automatic timing

Power supply: AC220V± 10% 50Hz

Iii. Performance and Characteristics:

1. Adopting the cooling system of the compound compressor, it has the characteristics of fast cooling speed, long service life and no need of circulating cooling water.

2, imported compressor, low noise, small vibration.

3, the use of imported digital temperature controller temperature control, temperature control precision is high, intuitive display.

4. Digital display timer is used for timing, which is convenient. When the set time is reached, it will automatically alarm and remind the operator to finish the test.