JVR360Z旋挖钻机-恒天九五重工有限公司手机版

详细介绍

拥有可靠的系统与强劲的动力及可拓展性履带，加长的履带长度，增加履带展开后宽度，提高钻机的稳定性，上车平台双减速机驱动，解决制动难题，适应各种复杂工况，具有经济、高效、环保、稳定等多重特点。

Possessing reliable system, strong power and expansible tracks. Lengthened tracks improve stability of drill rig. Up structure is driven by dual reduction gears, which eliminates braking problems. The system is capable of adapting all complicated working conditions, with advantages such as economical, efficient, environmental-friendly, stable, etc.

选择Cummins QSM11-C428柴油发动机。通过改善燃烧过程，使该发动机油耗降低，功率428马力，即319KW。主要部件改进：凸轮轴、活塞、喷油器、废气放气阀涡轮增压器、滤清器；改进曲轴箱呼吸系统、机油泵带衬套；改进耐磨性以延长保养周期。

Cummins QSM11-C428 diesel engine is selected. By altering combustion processes, fuel consumption of this engine is reduced, with maximum power of 428 bhp, which is 319KW. Improvement of main components: camshaft, piston, oil atomizer, turbocharger for waste gas release valve, filter; improved crankcase breathing system, fit machine oil pump with lining; improve abrasive resistance to extend maintenance cycle.

主卷扬被设计在钻机的回转平台内，采用力士乐进口的减速机与马达，可靠性高，维护成本低,钻机的稳定性好；钢丝绳的直径36毫米，钢丝绳工作在卷筒的层，成倍地提高钢丝绳的使用寿命，降低客户的维护成本，同时，增加的落地保护功能，的延长了主卷扬的使用寿命。

Main winching device is built in rotatory platform, adopting imported Rexroth reducer and motor, featuring high stability, low maintenance costs and great stability of drill; steel cable diameter is 36 mm, operating on the first layer of reel drum, multiplying service life of steel cable, reducing customers' maintenance costs. Falling protection feature is also added to improve service life of main winching device.

机型 Model	JVR360Z
输出扭距 Max. output torque (KN.m)	360
钻孔深度 Max. drilling depth (m)	90
钻孔直径 Max. drilling diameter (mm)	2500
发动机生产厂家 Engine brand	Cummins
发动机型号 Engine model	Cummins QSM11-C428
发动机功率 Engine power (KW)	319
主泵流量 Main pump flow rate	2×288 L/min@2100rpm
底盘型号 Undercarriage model	Self-made undercarriage
牵引力 Traction force (KN)	549
钻孔转速 Drilling speed (rpm)	5 - 30
加压力/起拔力 Max. crowd push force (KN)	365 / 365
加压系统行程 Stroke of sledge (mm)	6200
主卷扬提升力（层）Main winch pull (1st layer)	320
主卷扬绳直径 Main winch wire rope dia. (mm)	Φ36
主卷扬提升速度 Max. main winch line speed (m/min)	64
副卷扬提升力（层）Aux. winch line pull (1st layer) (KN)	103
副卷扬绳直径 Aux. winch wire rope dia. (mm)	Φ20
副卷扬提升速度 Aux. winch line speed (m/min)	69
工作状态设备宽度/高度 Overall width in drilling position (mm)	4500 / 23930
运输状态设备长度/宽度/高度 Overall L/H/W transport position (mm)	17062 / 3000 / 3600
总重量（含钻杆）Total weight (t)	92

产品简介

详细介绍