型号Type	减速比Ratio	L mm	* 空载转速R.P.M. no load min-1	* 转速R.P.M. S1 min-1	扭矩S1 Torque Nm	* 转速R.P.M. S2 min-1	扭矩S2 Torque Nm	扭矩Max Torque Nm	I max A	I S1 24 Vdc	I S2 24 Vdc
MVR 752 26 63 1/120	120	56	15.0	13.0	7	10.2	13.5	24	4	1.1	1.8
MVR 752 26 63 1/240	240	76	8.0	7.0	15.50	5.5	28.5	80	6	1.5	2.5
MVR 752 26 63 1/360	360	76	5.5	5.0	16.00	4	29	85	4.2	1.1	1.8
MVR 752 26 63 1/480	480	76	4.0	3.6	15.50	3.2	29	85	4	1	1.6
MVR 752 26 63 1/720	720	76	2.7	2.5	16.00	2.2	29	85	3	0.9	1.2

Gear motor with worm screw and standard motor Ø 52 12/24 Vdc 2000 RPM output 45W, with noise suppressor.
Starting corrent 6 A.
Driving shaft mounted on two bearing Outlet shaft supported by two bearings.
Design to give low RPM in little dimension.
* The rotation speed can change of ±10%.
The S1 load test was made using a corrent in the air with an increase of temperature of 70 C°.
The S2 load test was made using a corrent in the air with a 50% timing 5’ with an increase of temperature
of 80 C° max.
The starting corrent (I max) cannot be maintained for more than 2".
Max forces wich may act on the outlet shaft: Axial 30 kg, Radial 40 kg.
It is possible to apply an encoder