Gear motor with worm screw and standard motor Ø 63 12/24 Vdc 3000 RPM loadness 120W. Starting corrent 22 A.

Driving shaft mounted with on 2 ball bearings Outlet shaft supported by two ball bearing with oil splash guard
on outlet side.
Is possible to have magnetic encoder 4 pulse for turne 2 channel.
Connecting 2 wire 0,75 x 200 mm.
*The rotation speed can change of ±10%.
The S1 load test was made using a 5 A current in the air with an increase of temperature of 70°.
The S2 test was made using 11,5 A current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The starting current (I max) cannot be maintained for more than 2".
Max forces wich may act on outlet shaft Axial 25 Kg, Radial 40 Kg.
It is possible to apply an encoder.