全自动三坐标机564
产品简介
详细信息
| 行程范围(mm) Measuring Strokes | 外形尺寸(mm) Overall Dimension | 主机重量 (Kg) Machine Weight | 被测工件重量 (Kg) Max. Part Weight | |||||
| X | Y | Z | Lx | Ly | Lz | |||
| 500 | 600 | 400 | 1050 | 1535 | 2247 | 590 | 300 | |
| 精度指标：（根据ISO10360-2坐标测量机的性能评定标准）(Accuracy is according to ISO 10360 – 2) | ||||||||
| 允许示值误差MPEE (mm) Maximum permissible error of indication of a CMM for size measurement (mm) | 允许探测误差MPEP (mm) Maximum permissible Probing Error(mm) | |||||||
| 2.8+L/300 | 3.5 | |||||||
| 动态性能Dynamic Performance | ||||||||
| 3D运动速度(mm/s) 3D positioning speed | 3D运动加速度(mm/s2) 3D acceleration | |||||||
| 520 | 1730 | |||||||
环境条件要求 EnvironmentSpecifications:
| 测量机室温度要求：Room Required Specifications | |
| 房间温度 (温控间) Room Temperature | 18～22°C |
| 温度梯度(时间)Temperature Gradient (in time) | 1°C /h |
| 温度梯度(时间)Temperature Gradient (in time) | 2°C /24h |
| 温度梯度(空间)TemperatureGradient (in the volume) | 1°C /m |
| 测量机室湿度要求：Humidity Required Specifications | |
| 空气相对湿度Relative humidity | 45-75％ |
| 气源要求：Air Supply System Required Specifications | |
| 最小供气压力Min. air pressure | 7 bar [0.7MPa] |
| 耗气量Air consumption | 180 NL/min |
| 电源要求：Electrical requirements | |
| 电压Voltage | 220V ± 10% |
| 频率Frequency | 50/60 Hz |
| 电流Current | 15A |
| 用电设备要求接地可靠：接地电阻小于4欧姆 A good earth ground (less than 4 W) is required for reliableoperation of the electrical controls. | |
