重工机械网

JSR1604多用途测定器

一、符合GB/T510、GB/T3535、SH/T0248标准

二、主要技术参数：

冷 浴 孔：双孔

致冷温度：常温～-45℃

控温精度：±0.5℃

降温时间：＜1.5小时

控温方式：数显温控仪控温

致冷方式：压缩机致冷  配吸滤装置

适应范围：可做凝点、倾点、冷滤点

工作电源：AC220V±10%  50HZ

三、性能及特点：

1、采用的制冷技术制造，降温速度快，振动小，噪音低。

2、采用数显温控仪自动控温，精度高，显示直观。计时报警。

JSR1604 multipurpose tester

I. It conforms to GB/T510, GB/T3535 and SH/T0248 standards

Ii. Main Technical parameters:

Cold bath hole: double hole

Cooling temperature: normal temperature ~ -45℃

Temperature control accuracy: ±0.5℃

Cooling time: < 1.5 hours

Temperature control: Digital display temperature controller

Refrigerating mode: compressor refrigerating with suction filter device

Range of application: freezing point, pouring point, cold filter point

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1, the use of advanced refrigeration technology manufacturing, cooling speed, small vibration, low noise.

2. Adopt digital display temperature controller to automatically control temperature with high precision and intuitive display. Time alarm.