GB系列·全陶瓷柱式粉碎机（打散机）
产品简介
详细信息
产品详情：
GB系列·全陶瓷柱式粉碎机（打散机）
GB series · All ceramic column crusher (disperser)
工作原理：
设备粉碎腔内安装一动一静两个粉碎盘，每个粉碎盘上装有数十个粉碎柱，互相交错，动盘在电机的带动下高速旋转，粉碎柱产生强大的冲击力，颗粒状物料落入粉碎腔后就会在粉碎柱的冲击作用下细化，最终从内部挡圈下部的缺口处出料。
working principle:
Two crushing discs are installed in the crushing cavity of the equipment. Each crushing disc is equipped with dozens of crushing columns, which are staggered with each other. The moving disc rotates at high speed under the drive of the motor. After entering the crushing cavity, it will be refined under the impact of the crushing column, and finally discharged from the gap at the lower part of the inner retaining ring.
设备特点：
- 利用了“机械冲击”的原理，处理量相对较高，能耗低，且不易积料，清洗方便。
- 冲击磨损部位全部工程陶瓷防护，从而满足多数高新材料避免金属杂质污染要求（关键部位包括粉碎柱、挡圈等）。
- 可作为气流粉碎、机械粉碎等细粉碎设备的前道预处理装置，也可更换不锈钢筛网或配合振动筛生产最终产品；根据物料性质，可灵活选择单机间歇式使用或配合后道收料设备连续式使用。
1. Using the principle of "mechanical impact", the processing capacity is relatively high, the energy consumption is low, and it is not easy to accumulate materials, and the cleaning is convenient.
2. All impact wear parts are protected by engineering ceramics to meet the requirements of most high-tech materials to avoid metal impurity contamination (the key parts include crushing columns and retaining rings, etc.).
3. It can be used as the front pretreatment device of fine crushing equipment such as air flow crushing and mechanical crushing. It can also replace the stainless steel screen or cooperate with the vibrating screen to produce the final product; according to the material properties, it can be flexibly selected for single-machine intermittent use or combined with the subsequent collection for continuous use of material equipment.
技术参数表(Technical Data Sheet)：
注：具体配置及处理效果需根据物料性质与加工要求确认，可与我司工程师沟通或来料试验。
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and you can communicate with our engineers or come to do materials processing test first.
实物图片(Physical picture)：
