热能行业风机（Centrifugal fan for thermal energy industry）3
产品简介
详细信息
一、性能参数
风量范围：2655～83650m3/h
风压范围：520～2360 Pa
传动方向：皮带式（C）
方向角度：可制成顺时针或逆时针，均可制成0°，45°，90°，135°，180°，225°，270°，315°八种角度。
二、用途
保温式风机是一款以输送热能的风机，针对于涂装设备烤炉，工业烤箱，工业烤炉，热风循环场所。中压型，耐高温，高效耐用，风叶分为后倾式和S型风叶，叶片宽大，流线型设计不易堵塞，噪音低，广泛用于涂装行业，高温炉行业，陶瓷窑炉行业等输送热气。
特别说明：
保温风机作热风循环时，请在停机前预先关闭热能设备10分钟以后再关闭风机，以免使风机叶轮局部产生高温而变形。
保温风机在安装时风机外壳请保持与热交换室在1.5米以上，以防火苗烧到风叶导致变形。
普通铁材质保温的，风机只能承受200度以内的温度，高于此温度请选择不绣钢材质（需客户说明）
Performance parameters:
Air volume range: 2655 ～ 83650m3/h
Wind pressure range: 520-2360 Pa
Driving direction: belt type (C)
Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.
Application:
Heat preservation fan is a fan for conveying heat energy. It has a remarkable effect on coating equipment ovens, industrial ovens, industrial ovens and hot air circulation places. Medium pressure type, high temperature resistance, high efficiency and durability. The blades are divided into backward inclined and S-shaped blades. The blades are wide, streamlined design is not easy to block, and the noise is low. They are widely used in the coating industry, high-temperature furnace industry, ceramic kiln industry and other industries to transport hot gas.
Special instructions:
When the insulation fan is used for hot air circulation, please turn off the thermal equipment 10 minutes before shutdown, and then turn off the fan to avoid local high temperature and deformation of the fan impeller.
When installing the insulation fan, please keep the fan shell more than 1.5m away from the heat exchange room, so as to prevent the fire from burning the fan blade and causing deformation.
For ordinary iron insulation, the fan can only withstａnd a temperature of less than 200 degrees. If the temperature is higher than this, please choose stainless steel (to be explained by the customer)