灌缝料加热炉（MKGJ-150Z）-重工机械网

灌缝料加热炉（MKGJ-150Z）

供应商：: 泉州市闽盛交通科技有限公司

企业类型：: 其他

产品简介

性能特点：具有不烧焦灌缝料、出料温度自控、车载移动、结构紧凑、操作简便等优点

详细信息

产品介绍

设备包括：储料桶、燃烧器、传动机构、小型发电机等。采用自动柴油燃烧器对卧式转动储料桶（加热筒）进行间接加热方式，使桶内灌缝料熔化升温，不烧焦老化，比导热油加热方式结构更紧凑轻巧，通过温度传感器与PLC配合控制燃烧器点火以保证灌缝料达到设定温度（自动调节）。熔化的高温灌缝材料通过桶底部放油开关按需要量放出，用于配套小型灌缝机（本公司的手推式）施工作业中的灌缝料加热。具有不烧焦灌缝料、出料温度自控、车载移动、结构紧凑、操作简便等优点。

Brief introduction: the equipment includes: storage barrel, burner, transmission mechanism, small generator and so on.Adopting automatic diesel burner for horizontal rotating storage VAT (heating tube) and indirect heating method, melt filling and sewing the material in barrel temperature, aging, not burnt structure more compact and lighter than the thermal oil heating way, through the temperature sensor and PLC control burner ignition to ensure filling and sewing the material reach the set temperature automatic regulation ().The melted high temperature joint material is discharged through the oil drain switch at the bottom of the barrel according to the demand. It is used to heat the joint material in the construction of small joint filling machine (our hand-pushed type).The utility model has the advantages of non-burning joint material, automatic control of discharge temperature, vehicle-mounted movement, compact structure and simple operation.

技术参数

1、结构形式：车载式

2、加热方式：旋转筒式燃烧器间接加热;

3、温控模式：传感器与PLC结合自动控制;

4、加热筒有效容积：150L;

5、加热温度：170~2000c(设定自控);

6、发动机功率：1.5kw;

7、驱动电机功率：0.75kw;

8、燃烧器功率：5万大卡;

9：外形尺寸：2.2×0.95×1.4(m)

10：自重(无装料)：410Kg

结构特点：

1、燃烧器火焰对料桶直接加热进而间接加热灌缝料，加热速度快又不烧坏灌缝料;

2、料桶(加热筒)加热过程采用转动方式，灌缝料受热均匀;

3、温度传感器与PLC结合对燃烧器控制，保证出料温度恒定;

4、放料时自动停在设定的放料位置，确保操作安全。

Performance parameters:

1. Structure: vehicle-mounted

2. Heating mode: indirect heating by rotary cylinder burner;

3, temperature control mode: sensor and PLC combined with automatic control;

4. Effective volume of heating cylinder: 150L;

5. Heating temperature: 170~2000c (set and controlled);

6. Engine power: 1.5kw;

7. Driving motor power: 0.75kw;

8. Burner power: 50,000 kcal;

9. Overall dimension: 2.2 0.95 1.4 (m)

10: dead weight (no charge) : 410Kg

Structural features:

1. The burner flame directly heats the material barrel and then indirectly heats the pouring joint material, which is quick and does not burn out the pouring joint material;

2. The heating process of the material barrel (heating cylinder) adopts rotational mode, and the filling joint is heated evenly;

3. The temperature sensor and PLC are combined to control the burner to ensure the constant discharge temperature;

4. Automatic stop at the set feeding position to ensure safe operation.