重工机械网

　　双羊大型电动推拉门适用于洞口跨度大、高度高的大型洞口，多适用于机场，机务维修中心、大型工业厂房等场合。

　　配合专业BT201触摸屏控制系统。可实现直观的检测与电动控制。

　　Large electric sliding door is mainly used in large hole with large height and width, and more applicable to the field of airports, aircraft maintenance center, large-scale industrial plants,etc.

　　With the professional the BT201 touch screen control system, it can make intuitive detection and electric control.

　　大型电动推拉门性能特点

　　1、加工方式，所有钢结构均事先充分预加工，现场仅需螺栓连接，保证加工精度;

　　Processing method:

　　All the steel structure must be pre-professed in advance.

　　We only connect them with bolt in the project site, must ensure the accuracy.

　　2、控制方式，控制系统采用专业设计控制板，有效保证门体运行稳定，维护和升级方便，且可靠性高;

　　Control method:

　　We use professionally designed control panel for control system, effectively guarantee the running stability of the door, convenience in maintenance and upgrading, as well as high reliability.

　　3、在应用材料上，大门的供电滑触线和控制系统均从国外进口，可靠性高;大门在次采用40mm厚插接口聚碳酸酯板材，保温好，无压条，透光率高、重量轻、抗冲击性能强，并能有效防止紫外线通过;

　　Material: both power supply line and control system of the door are imported from abroad, with high reliability. The inspection window is firstly made of 40mm thick jack polycarbonate sheet, with good thermal insulation, high light transmittance, light weight, strong impact resistance and can effectively prevent the ultraviolet light going through.