重工机械网

登录

通用设备螺杆泵

双组份螺杆泵(Psv-flow600D)

供应商:
深圳市泰弈智能科技有限公司
企业类型:
其他

产品简介

产品介绍Psv-flow600D双组份螺杆泵是精密容积式计量输送产品,专门用于双组份胶粘剂的输送。采用螺旋结构设计,螺杆和定子是自密封设计,螺杆在定子型腔内旋转实现定量输送功能。输送过程不对介质产生剪切作用,对介质特性不产生影响。调节两电机转速即可快速调整两组份点胶比例。

详细信息

产品参数 | Product parameters

特点及优势

点胶精度高:采用双伺服电机驱动,偏心螺旋杆送料,使双组份胶粘剂能够连续稳定输出

High dispensing accuracy: driven by dual servo motor, eccentric screw feeding, enabling continuous and stable output of two-component glue

广泛适用的胶体粘度及吐胶量:调节电机转速和气体压力,可点涂不同粘度的胶体,并可快速改变吐胶量的大小

Widely applicable colloidal viscosity and glue amount: adjust motor speed and gas pressure, point jet glue with different viscosity, and quickly change the glue amount

简单可调的双组份混合比:调节电机转速,可快速改变两种组份的混合比

Simple and adjustable two-component mixing ratio: adjust the motor speed to quickly change the mixing ratio of the two components

定子适应性好:定子耐介质腐蚀,使用寿命长,大大降低用户的综合使用成本

Good adaptability of the stator: the stator is resistant to medium corrosion and has a long service life, which greatly reduces the user's comprehensive cost.

容积式计量:真正的容积式输送,流量不受压力变化影响

Volumetric metering: true volumetric delivery, flow is not affected by pressure changes

输出压力高:单泵输出压力20bar,双泵输出压力可达40bar

High output pressure: single pump output pressure up to 20 bar, double pump output maximum pressure up to 40bar

 

 

 

双组份螺杆泵技术参数2-Component Screw Pump Parameters

尺寸(长*宽*高)Dimensions (length * width * height)

284.35mm x 184.6mm x 29mm
产品型号 Psv-flow600D
重量Weight 约2 kg
接液部材质Wetted parts material 不锈钢/耐腐蚀复合材料stainless steel / corrosion resistant composite
电机规格Motor specifications 伺服电机servo motor
电机转速Motor speed 1~120 r/min
进料口Inlet NPT 1/8
输入压力Input pressure 0~6bar
输出压力Output pressure 0~20bar
工作环境Working environment 0~40℃
适用胶体粘度Applicable colloidal viscosity 0~1000,000 cps
吐胶量Glue Spitting amount 0.06 ml/r
胶体流量Colloidal flow 0.06~7.2 ml/min
最小吐胶量Minimum glue amount 00.005 ml
精度Precision ±1%
自密封Self-sealing 2 bar
储存条件Storage conditions 干燥无尘dry and dustless,-10℃~+40℃
混合比Mixing ratio 1:1~10:1