CMP T3CDSHT系列铠装防爆格兰(CMP T3CDSHT Cable Gland)
产品简介
上海颐品自动化科技有限公司,:
详细信息
CMP T3CDSHT系列铠装防爆格兰(CMP T3CDSHT Cable Gland)
CMP Triton CDS (T3CDSHT) | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Cable Gland
For all types of Armoured Cables
上海颐品自动化科技有限公司,:
Internationally Approved, Explosive Atmosphere Cable Gland
• -20?C to 200?C high temperature ThermEx seals
• Fully sequential, three step installation procedure
• Reduces installation times, cost & risk
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of cable diameter
• Designed to prevent Coldflow
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Internationally marked, IECEx & ATEX
• EMC tested
† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).
Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below. Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.
Certificates
Click here to view Certificates
Product Selection Table
PRODUCT SELECTION TABLE
CLICK HERE TO VIEW TECHNICAL ILLUSTRATION
TECHNICAL ILLUSTRATION
CLICK HERE TO VIEW HOW TO ORDER
Showing: Imperial Metric
Cable Gland Size | Available Entry Threads "?C?" (Alternate Metric Thread Lengths Available) | Cable Bedding Diameter ?"A?" | Overall Cable Diameter ?"B?" | Armour Range † | Across Flats "?D?" | Across Corners ?"D"? | Protrusion Length ?"F?" | Combined Ordering Reference (Brass Metric) | Shroud | Cable Gland Weight (Kgs) | |||||||||||
Standard | Option | Grooved Cone (X) | Stepped Cone (W) | ||||||||||||||||||
Metric | Thread Length (Metric) ?"E?" | NPT | Thread Length (NPT) ?"E"? | NPT | Min | Max | Min | Max | Min | Max | Min | Max | Max | Max | Size | Type | Ordering Suffix | ||||
20s16 | M20 | 15.0 | 1/2?" | 19.9 | 3/4?" | 3.1 | 8.6 | 6.1 | 13.1 | 0.3 | 1.0 | 0.8 | 1.25 | 24.0 | 26.4 | 78.7 | 20S16 | T3CDSHT | 1RA | PVC36 | 0.200 |
20S | M20 | 15.0 | 1/2?" | 19.9 | 3/4?" | 6.1 | 11.6 | 9.5 | 15.9 | 0.3 | 1.0 | 0.8 | 1.25 | 24.0 | 26.4 | 78.7 | 20S | T3CDSHT | 1RA | PVC36 | 0.200 |
20 | M20 | 15.0 | 1/2?" | 19.9 | 3/4?" | 6.5 | 13.9 | 12.5 | 20.9 | 0.4 | 1.0 | 0.8 | 1.25 | 30.5 | 33.6 | 76.2 | 20 | T3CDSHT | 1RA | PVC06 | 0.280 |
25S | M25 | 15.0 | 3/4?" | 20.2 | 1?" | 11.1 | 19.9 | 14.0 | 22.0 | 0.4 | 1.2 | 1.25 | 1.6 | 37.5 | 41.3 | 88.8 | 25S | T3CDSHT | 1RA | PVC09 | 0.440 |
25 | M25 | 15.0 | 3/4?" | 20.2 | 1?" | 11.1 | 19.9 | 18.2 | 26.2 | 0.4 | 1.2 | 1.25 | 1.6 | 37.5 | 41.3 | 88.7 | 25 | T3CDSHT | 1RA | PVC09 | 0.440 |
32 | M32 | 15.0 | 1?" | 25.0 | 1 1/4?" | 17.0 | 26.2 | 23.7 | 33.9 | 0.4 | 1.2 | 1.6 | 2.0 | 46.0 | 50.6 | 90.7 | 32 | T3CDSHT | 1RA | PVC11 | 0.630 |
40 | M40 | 15.0 | 1 1/4?" | 25.6 | 1 1/2?" | 22.0 | 32.1 | 27.9 | 40.4 | 0.4 | 1.6 | 1.6 | 2.0 | 55.0 | 60.5 | 93.2 | 40 | T3CDSHT | 1RA | PVC15 | 0.910 |
50S | M50 | 15.0 | 1 1/2?" | 26.1 | 2?" | 29.5 | 38.1 | 35.2 | 46.7 | 0.4 | 1.6 | 2.0 | 2.5 | 60.0 | 66.0 | 100.7 | 50S | T3CDSHT | 1RA | PVC18 | 1.120 |
50 | M50 | 15.0 | 2?" | 26.9 | 2 1/2?" | 35.6 | 44.0 | 40.4 | 53.0 | 0.6 | 1.6 | 2.0 | 2.5 | 70.1 | 77.1 | 105.8 | 50 | T3CDSHT | 1RA | PVC21 | 1.600 |
63S | M63 | 15.0 | 2?" | 26.9 | 2 1/2?" | 40.1 | 49.9 | 45.6 | 59.4 | 0.6 | 1.6 | 2.0 | 2.5 | 75.0 | 82.4 | 102.5 | 63S | T3CDSHT | 1RA | PVC23 | 1.730 |
63 | M63 | 15.0 | 2 1/2?" | 39.9 | 3?" | 47.2 | 55.9 | 54.6 | 65.8 | 0.6 | 1.6 | 2.0 | 2.5 | 80.0 | 88.0 | 105.4 | 63 | T3CDSHT | 1RA | PVC25 | 1.780 |
75S | M75 | 15.0 | 2 1/2?" | 39.9 | 3?" | 52.8 | 61.9 | 59.0 | 72.0 | 0.6 | 1.6 | 2.0 | 2.5 | 90.0 | 99.0 | 110.6 | 75S | T3CDSHT | 1RA | PVC28 | 2.570 |
75 | M75 | 15.0 | 3?" | 41.5 | 3 1/2?" | 59.1 | 67.9 | 66.7 | 78.4 | 0.6 | 1.6 | 2.5 | 3.0 | 100.0 | 110.0 | 120.3 | 75 | T3CDSHT | 1RA | PVC30 | 3.330 |
90 | M90 | 24.0 | 3 1/2?" | 42.8 | 4?" | 66.6 | 78.6 | 76.2 | 90.3 | 0.8 | 1.6 | 3.15 | 4.0 | 115.0 | 126.5 | 138.9 | 90 | T3CDSHT | 1RA | PVC32 | 4.870 |
100 | M100 | 24.0 | 3 1/2?" | 42.8 | 4?" | 76.0 | 90.9 | 86.1 | 101.4 | 0.8 | 1.6 | 3.15 | 4.0 | 127.0 | 139.7 | 128.2 | 100 | T3CDSHT | 1RA | LSF33 | 4.970 |
115 | M115 | 24.0 | 4?" | 44.0 | 5?" | 86.0 | 97.9 | 101.5 | 110.2 | 0.8 | 1.6 | 3.15 | 4.0 | 138.0 | 151.8 | 161.3 | 115 | T3CDSHT | 1RA | LSF34 | 7.720 |
130 | M130 | 24.0 | 5?" | 46.8 | - | 97.0 | 114.9 | 110.2 | 123.2 | 0.8 | 1.6 | 3.15 | 4.0 | 157.0 | 172.7 | 173.3 | 130 | T3CDSHT | 1RA | LSF35 | 9.780 |
Dimensions are displayed in millimetres unless otherwise stated |
中国区分销商:
上海颐品自动化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*:
因为专业,所以放心!