EPIN-HSM系列金属电缆防水接头（Metal cable gland）
产品简介
EPIN-HSM系列金属电缆防水接头（Metal cable gland）
EPIN-HSM系列金属电缆防水接头（Metal cable gland）
详细信息
EPIN-HSM系列金属电缆防水接头(Metal cable gland)
□ 产品材质: 外部金属为黄铜镀镍 内部芯套为尼龙 密封件材料为改性橡胶
□ 防护等级: 在规定的卡口范围之内，防护等级可以达到IP68
□ 性能: 通过IEC-60077-1999抗振动和抗冲击试验, 通过RoHS测试
□ 温度范围: -40℃到100℃，短时间可以达到120℃
□ Material: Body:nickel-plated brass Seal: Polyamide , Sealing:modified rubber
□ Protection degree: Within the clamping range, its protection degree can reach IP68.
□ Properties: succeed in the experiment of IEC-60077-1999 resistance to
vibration and impact, passed RoHS
□ Temperature Range: Min-40℃, Max100℃,Short-term120℃
订货编号 | 螺纹规格 | 卡口范围 | 螺纹长度 | 扳手尺寸 | 包装单位 |
HSM.DS-M/nxd | Dimension | mm | mm | mm | units |
HSM.DS-M20/5×2.5 | M20×1.5 | 5×2.5 | 7 | 22 | 50 |
HSM.DS-M25/3×5 | M25×1.5 | 3×5 | 7 | 28 | 25 |
HSM.DS-M25/3×6.5 | M25×1.5 | 3×6.5 | 7 | 30/28 | 25 |
HSM.DS-M25/4×3.5 | M25×1.5 | 4×3.5 | 7 | 28 | 25 |
HSM.DS-M25/4×5 | M25×1.5 | 4×5 | 7 | 28 | 25 |
HSM.DS-M25/2×8.5 | M25×1.5 | 2×8.5 | 7 | 30 | 25 |
HSM.DS-M25/5×8.5 | M25×1.5 | 5×8.5 | 7 | 45 | 25 |
HSM.DS-M32/3×8.5 | M32×1.5 | 3×8.5 | 8 | 36 | 20 |
HSM.DS-M32/5×5.5 | M32×1.5 | 5×5.5 | 8 | 36 | 20 |
HSM.DS-M40/5×8.5 | M40×1.5 | 5×8.5 | 9 | 45 | 10 |
HSM.DS-M40/3×12.5 | M40×1.5 | 3×12.5 | 9 | 45 | 10 |
HSM.DS-M50/4×12.5 | M50×1.5 | 4×12.5 | 9 | 50/55 | 10 |
HSM.DS-M50/5×12.5 | M50×1.5 | 5×12.5 | 9 | 60 | 5 |
HSM.DS-M50/13×7 | M50×1.5 | 13×7 | 9 | 55 | 10 |
订货编号 | 螺纹规格 | 卡口范围 | 螺纹外径 | 螺纹长度 | H | 扳手尺寸 | 包装单位 |
MHSM-M | Dimension | mm | mm | mm | mm | mm | units |
MHSM-M25 | M25×1.5 | 12-15 | 25 | 7 | 39 | 26/28 | 25 |
MHSM-M25-D | M25×1.5 | 14-17 | 25 | 7 | 42.5 | 28 | 25 |
MHSM-M32-H | M32×1.5 | 14-17 | 32 | 8 | 42.5 | 36 | 20 |
MHSM-M32-X1 | M32×1.5 | 17-20 | 32 | 8 | 51.5 | 36 | 20 |
MHSM-M32-X1-L | M32×1.5 | 17-20 | 32 | 12 | 51.5 | 36 | 20 |
MHSM-M36 | M36×2.0 | 21-26 | 36 | 8 | 50.5 | 45 | 1 |
订货编号 | 螺纹规格 | 卡口范围 | 螺纹长度 | 扳手尺寸 | 包装单位 |
HSM.DS-M/nxd | Dimension | mm | mm | mm | units |
HSM.DS-M20/5×2.5 | M20×1.5 | 5×2.5 | 7 | 22 | 50 |
HSM.DS-M25/3×5 | M25×1.5 | 3×5 | 7 | 28 | 25 |
HSM.DS-M25/3×6.5 | M25×1.5 | 3×6.5 | 7 | 30/28 | 25 |
HSM.DS-M25/4×3.5 | M25×1.5 | 4×3.5 | 7 | 28 | 25 |
HSM.DS-M25/4×5 | M25×1.5 | 4×5 | 7 | 28 | 25 |
HSM.DS-M25/2×8.5 | M25×1.5 | 2×8.5 | 7 | 30 | 25 |
HSM.DS-M25/5×8.5 | M25×1.5 | 5×8.5 | 7 | 45 | 25 |
HSM.DS-M32/3×8.5 | M32×1.5 | 3×8.5 | 8 | 36 | 20 |
HSM.DS-M32/5×5.5 | M32×1.5 | 5×5.5 | 8 | 36 | 20 |
HSM.DS-M40/5×8.5 | M40×1.5 | 5×8.5 | 9 | 45 | 10 |
HSM.DS-M40/3×12.5 | M40×1.5 | 3×12.5 | 9 | 45 | 10 |
HSM.DS-M50/4×12.5 | M50×1.5 | 4×12.5 | 9 | 50/55 | 10 |
HSM.DS-M50/5×12.5 | M50×1.5 | 5×12.5 | 9 | 60 | 5 |
HSM.DS-M50/13×7 | M50×1.5 | 13×7 | 9 | 55 | 10 |
规型号 | 螺纹规格 | 卡口范围 | 螺纹外径 | 螺纹长度 | H | 扳手尺寸 | 包装单位 |
HSMS.D-M | Dimension | mm | mm | mm | mm | mm | units |
HSMS.D-M12/7 | M12×1.5 | 4.5~7 | 12 | 6 | 19 | 17 | 50 |
HSMS.D-M16/7 | M16×1.5 | 4.5~7 | 16 | 7 | 19 | 18/17 | 50 |
HSMS.D-M16/9.5 | M16×1.5 | 6.5~9.5 | 16 | 7 | 20 | 18/17 | 50 |
HSMS.D-M18/7 | M18×1.5 | 4.5~7 | 18 | 7 | 19.5 | 20/17 | 50 |
HSMS.D-M18/9.5 | M18×1.5 | 6.5~9.5 | 18 | 7 | 20.5 | 20/17 | 50 |
HSMS.D-M20/7 | M20×1.5 | 4.5~7 | 20 | 7 | 19.5 | 22/17 | 50 |
HSMS.D-M20/9.5 | M20×1.5 | 6.5~9.5 | 20 | 7 | 20.5 | 22/17 | 50 |
HSMS.D-M20/13 | M20×1.5 | 9~13 | 20 | 7 | 21.5 | 22 | 50 |
HSMS.D-M25/9.5 | M25×1.5 | 6.5~9.5 | 25 | 7 | 20.5 | 28/17 | 25 |
HSMS.D-M25/13 | M25×1.5 | 9~13 | 25 | 7 | 21.5 | 28/22 | 25 |
HSMS.D-M25/17 | M25×1.5 | 13~17 | 25 | 7 | 24 | 28 | 25 |
HSMS.D-M32/13 | M32×1.5 | 9~13 | 32 | 8 | 22 | 36/22 | 20 |
HSMS.D-M32/17 | M32×1.5 | 13~17 | 32 | 8 | 24.5 | 36/28 | 20 |
HSMS.D-M32/18 | M32×1.5 | 14~18 | 32 | 8 | 25 | 36 | 20 |
HSMS.D-M32/22 | M32×1.5 | 18~22 | 32 | 8 | 25 | 36 | 20 |
HSMS.D-M40/18 | M40×1.5 | 14~18 | 40 | 9 | 25.5 | 45/36 | 10 |
HSMS.D-M40/22 | M40×1.5 | 18~22 | 40 | 9 | 25.5 | 45/36 | 10 |
HSMS.D-M40/24 | M40×1.5 | 20~24 | 40 | 9 | 28.5 | 45 | 10 |
HSMS.D-M40/28 | M40×1.5 | 24~28 | 40 | 9 | 28.5 | 45 | 10 |
HSMS.D-M50/25 | M50×1.5 | 21~25 | 50 | 9 | 28.5 | 55/45 | 10 |
HSMS.D-M50/28 | M50×1.5 | 24~28 | 50 | 9 | 28.5 | 55/45 | 10 |
*HSMS.D-M50/32 | M50×1.5 | 27~32 | 50 | 9 | 31 | 55 | 10 |
*HSMS.D-M50/36 | M50×1.5 | 31~36 | 50 | 9 | 31 | 55 | 10 |
*HSMS.D-M50/40 | M50×1.5 | 35~40 | 50 | 9 | 32 | 55 | 10 |
*HSMS.D-M63/40 | M63×1.5 | 35~40 | 63 | 10 | 32 | 70/55 | 5 |
*HSMS.D-M63/46 | M63×1.5 | 40~46 | 63 | 10 | 35 | 70 | 5 |
*HSMS.D-M63/51 | M63×1.5 | 45~51 | 63 | 10 | 35 | 70 | 5 |