重工机械网

哪里有变压吸附制氮机制造厂家
变压吸附制氮机浙江哪有卖的,鼎岳空分                      
*的变压吸附制氮机哪里找，杭州鼎岳空分设备有限公司
找变压吸附制氮机?**是zui重要的, 再者售后服务才是硬道理。

我公司是专业设计、开发、生产碳分子筛制氮机厂家，纯度从95%～99.9995%的变压吸附制氮机可广泛应用于医药、化工、食品、电子、钢铁铝业、纺织、煤炭、石油、天然气、玻璃、机械、粉未冶金、磁性材料等行业。详细技术环节，请我公司24小时咨询：86-（0）或者请我公司相关人员现场交流。
一、碳分子筛制氮机
1、压缩空气净化组件
空气压缩机提供的压缩空气首先通入压缩空气净化组件中，压缩空气先由管道过滤器除去大部分的油、水、尘，再经冷冻干燥机进一步除水、精过滤器除油、除尘，并由在紧随其后的超精过滤器进行深度净化。根据系统工况，优埃基气体特别设计了一套压缩空气除油器，用来防止可能出现的微量油渗透，为碳分子筛提供充分保护。设计严谨的空气净化组件确保了碳分子筛的使用寿命。经本组件处理后的洁净空气可用于仪表空气。
2、空气储罐
空气储罐的作用是：降低气流脉动，起缓冲作用；从而减小系统压力波动，使压缩空气平稳地通过压缩空气净化组件，以便充分除去油水杂质，减轻后续PSA氧氮分离装置的负荷。同时，在吸附塔进行工作切换时，它也为PSA氧氮分离装置提供短时间内迅速升压所需的大量压缩空气，使吸附塔内压力很快上升到工作压力，保证了设备可靠稳定的运行。
3、氧氮分离装置
装有碳分子筛的吸附塔共有A、B两只。当洁净的压缩空气进入A塔入口端经碳分子筛向出口端流动时，O2、CO2和H2O被其吸附，产品氮气由吸附塔出口端流出。经一段时间后，A塔内的碳分子筛吸附饱和。这时，A塔自动停止吸附，压缩空气流入B塔进行吸氧产氮，对并A塔分子筛进行再生。分子筛的再生是通过将吸附塔迅速下降至常压脱除已吸附的O2、CO2和H2O来实现的。两塔交替进行吸附和再生，完成氧氮分离，连续输出氮气。上述过程均由可编程序控制器（PLC）来控制。当出气端氮气纯度大小设定值时，PLC程序作用，自动放空阀门打开，将不合格氮气自动放空，确保不合格氮气不流向用气点。气体放空时利用消音器消声使噪声小于75dBA。
4、氮气缓冲罐
氮气缓冲罐用于均衡从氮氧分离系统分离出来的氮气的压力和纯度，保证连续供给氮气稳定。同时，在吸附塔进行工作切换后，它将本身的部分气体回充吸附塔，一方面帮助吸附塔升压，另外也起到保护床层的作用，在设备工作过程中起到极重要的工艺辅助作用。
制氮机、氮气机、氮气发生器、变压吸附制氮机、高纯度制氮机、制氮装置、制氮系统、制氮设备、变压吸附制氮机、制氮装备、制氮机组、氮气系统、PSA制氮机组、PSA制氮系统、PSA制氮装置、PSA制氮设备、氮气设备、空气分离制氮机、工业制氮机、高纯度制氮机、工业制氮装置、工业制氮系统、工业制氮装备、工业制氮设备、碳分子筛制氮机、立方制氮机、中小型制氮机，移动式制氮机，空气制氮机，原料空气制氮机，本公司可提供产量从3-3000Nm3/h，纯度从95%--99.9995%的氮气，可广泛应用于化工、电子、纺织、煤炭、石油、天然气、医药、食品、玻璃、机械、粉未冶金、磁性材料等行业。欢迎广大新老客户来本公司考察洽谈。
2，技术指标
空压机压力：0.6-1.0Mpa，氮气流量：3-3000Nm3/h，氮气纯度：95%-99.9995%
氮气出口压力：0.1-0.7Mpa，原料：洁净压缩空气的整套系统由以下部件组成：压缩空气净化组件、空气储罐、氧氮分离装置、氮气缓冲罐。

Where there is a variable pressure adsorption nitrogen making machine manufacturer

Variable pressure adsorption nitrogen making machine which has Zhejiang sell, Ding Yue Kong

Price concessions to the variable pressure adsorption nitrogen making machine where to look, Hangzhou Ding Yue Kong Equipment Company Limited

Looking for a pressure swing adsorption nitrogen machine? Preferred quality assurance is the most important, and after sale service is the hard truth.

Our company is a professional design, development, and production of carbon molecular sieve nitrogen making machine manufacturers, purity from 95% ~ 99.9995% of variable pressure adsorption nitrogen making machine can be widely used in pharmaceutical, chemical, food, electronics, steel, textile, coal, aluminum, glass, natural gas, petroleum machinery, powder metallurgy, magnetic materials and other industries. Detailed technical aspects, please call my company 24 hours service hotline:86 - （0）or ask my company personnel on site AC.

One, the carbon molecular sieve nitrogen making machine

1, compressed air purification unit

An air compressor providing compressed air to pass into the first compressed air purification assembly, compressed air from the pipe filter removes the majority of the oil, water, dust, and then by the freeze dryer further addition of water, a fine filter oil, dust, and followed by in ultra precision filter for deep purification. According to the system conditions, and Eiki gas specially designed a set of compressed air oil heater, used to prevent possible trace oil, to provide adequate protection for carbon molecular sieve. The design of rigorous air purifying components to ensure the durability of the carbon molecular sieve. The assembly process after the clean air can be used for instrument air.

In 2, an air storage tank

Air storage tank 's role is to: reduce airflow pulsation, buffer; thereby reducing the pressure fluctuation in the system, so that the compressed air smoothly through the compressed air purifying components, in order to fully remove the water impurities, reduce the subsequent PSA oxygen nitrogen separation device load. At the same time, in the absorption tower to switch, it is PSA oxygen nitrogen separation device is provided to quickly boost for the large number of compressed air, so that the pressure in the absorption tower quickly increased to the working pressure, and ensure the equipment reliable and stable operation.

3, oxygen nitrogen separation device

Equipped with special carbon molecular sieve adsorption tower consists of A, B two. When the clean compressed air to enter the A tower entrance end to an exit end of the carbon molecular sieve flow, O2, CO2and H2O were the adsorption, nitrogen adsorption tower outlet end out by. After a while, the A tower in carbon molecular sieve adsorption saturation. At this time, A tower automatic stop adsorption, compressed air flows into the B tower for oxygen production of nitrogen, and A molecular sieve regeneration tower. Molecular sieve is regenerated by the adsorption tower quickly dropped to atmospheric pressure to remove adsorbed O2, CO2 and H2O to realize. The two towers adsorption and regeneration, to complete the separation of oxygen and nitrogen, continuous output of nitrogen. These processes are controlled by a programmable controller （ PLC ） to control. When the gas outlet end of the purity of nitrogen size set value, PLC program, automatic vent valve is opened, the unqualified automatic nitrogen emptying, to ensure that no qualified nitrogen gas does not flow. Gas vent when using the engine muffler noise less than 75dBA.

In 4, a nitrogen buffer tank

Buffer tank is used for balanced from nitrogen and oxygen separation system for separating nitrogen pressure and purity, to ensure continuous and stable supply of nitrogen. At the same time, in the adsorption tower for work after switching, it will itself part of the gas to charge the adsorption tower, absorption tower hand help boost, and also to protect the bed to effect, in the process play a very important role in the process of auxiliary.

Nitrogen machine, nitrogen machine, nitrogen generator, variable pressure adsorption nitrogen machine, high-purity nitrogen, nitrogen producing device, nitrogen, nitrogen equipment, PSA nitrogen, nitrogen manufacture equipment, nitrogen producing units, nitrogen, nitrogen producing units, PSA PSA, PSA nitrogen nitrogen system device, PSA nitrogen equipment, nitrogen equipment, air separation nitrogen production machines, industrial nitrogen machine, high purity nitrogen machine, industrial nitrogen producing device, industrial nitrogen system, industrial nitrogen equipment, industrial nitrogen equipment, carbon molecular sieve nitrogen machine, cubic nitrogen machine, small and medium-sized nitrogen making machine, nitrogen-making machine, air, nitrogen machine, raw material air nitrogen machine, the company can provide the output from the3-3000Nm3/ h, the purity of nitrogen from95%--99.9995%, can be widely used in chemical industry, electronics, textile, coal, petroleum, natural gas, pharmaceutical, food, glass, machinery, powder metallurgy, magnetic materials industry. Welcome new and old customers to visit the company negotiate.

2, technical indicators

Air compressor pressure:0.6-1.0Mpa, nitrogen flow:3-3000Nm3/ h:95%-99.9995%, nitrogen purity

Nitrogen outlet pressure:0.1-0.7Mpa, raw materials: clean compressed air system comprises the following components: compressed air purification assembly, air tank, oxygen nitrogen separation device, a nitrogen buffer tank.