重工机械网

IC800SS1228RD2是阿格FANUC VersaMotion伺服电机控制器。该控制器是一个180-250伏交流设备，具有三相输入。它支持DeviceNet编程。控制器具有位置反馈、一个串行端口以及八个离散输入和输出。设备的前面板还显示模块状态、网络状态、地址/代码和正向/反向。双字符LED显示屏允许使用助记显示进行实时诊断更新，如“好的”，“OV”（代表马达过电压，）LE（对于失去启用，）等等.

IC800SS1228RD2设计用于特定系列的电机。这包括MTR-3S45-H、MTR-3S46H、MTR-3S63-G、MTR-3S65-G、MTR-3S67-G、MTR-3T45-1、MTR-3T54-H和MTR-3T55-H .这些电机的连续失速扭矩范围为32至150.3英寸-磅，额定转速范围为1，400至5，300转/分。具体信息请参考通用电气数据表。

十多年前，通用电气发那科公司将惠德科公司的IMJ型号并入S2K系列。如果您要更换其中一个控制器，请注意IC800SSI216RD2兼容一把IMJ 31GD-2d伺服电机控制器，带DeviceNet的16A解析器反馈。

IC800SS1228RD2的工作温度为0至50摄氏度。它的储存和运输温度为-40至80摄氏度，湿度为5%至95%（非冷凝）。散热器方向必须垂直。请注意该装置的额定工作深度为3300英尺；在咨询通用电气公司之前，不得进行更高海拔的操作。该模块的安装设计为四周留有3英寸的间隙，以便有效冷却。

The IC800SS1228RD2 is a GE FANUC VersaMotion Servo Motor Controller. This controller is a 180-250 VAC device with a 3-phase input. It supports DeviceNet programming. The controller has position feedback, a serial port, along with eight discrete inputs and outputs. The device’s front panel also displays module status, network status, address/code, and Fwd/reverse. The two-character LED display allows real-time diagnostic updates using mnemonic displays like “OK,” OV” (for motor over voltage,) LE (for Lost enable,) etc.

The IC800SS1228RD2 is designed to be used with a specific series of motors. This includes MTR-3S45-H, MTR-3S46H, MTR-3S63-G, MTR-3S65-G, MTR-3S67-G, MTR-3T45-1, MTR-3T54-H, and MTR-3T55-H. These motors range from 32 to 150.3 in-lb of continuous stall torque with rated speeds from 1,400 to 5,300 RPM. Please consult GE data sheets for specific information.

Over a decade ago, GE Fanuc incorporated Whedco Inc. IMJ models into the S2K series. If you are replacing one of these controllers, please note the IC800SSI216RD2 is compatible to a IMJ-31GD-2-D Servo Motor Controller, 16A Resolver Feedback with DeviceNet.

The IC800SS1228RD2 has an operating temperature of 0 to 50 degrees Celsius. Its storage and shipping temperatures are -40 to 80 degrees Celsius, with humidity of 5 to 95% non-condensing. The heat sink orientation must be vertical. Please note this unit is rated for operation to 3,300 feet; higher altitude operation should not occur before consulting with GE. The module is designed for installation with a clearance of 3 inches on all sides for effective cooling.